Among the many types of nail guns, taking a pneumatic nail gun as an example, the steps for using it are as follows:
1. Wear protective glasses and gloves, ensure that the air inlet is correctly connected to the air compressor outlet, and the air compressor pressure must reach at least 0.8MPA.
2. Take out the card slot and press the button below to take it out.
3. Put the matching nails into the card slot, and then push the card slot into the air nail gun, ensure that the card slot is stable and not loose, and check whether the air compressor pressure is normal.
4. Aim the nail outlet of the air nail gun at the position where the nail needs to be nailed in, gently press the nail outlet button, and the nail will be driven in smoothly.
